QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

Vol. 17, Issue 6, 2722-2734, June 2006

This Article Abstract Full Text (PDF) Supplemental Material All Versions of this Article: E06-02-0114v1 17/6/2722    most recent Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Similar articles in PubMed Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Google Scholar Articles by Ono, K. Articles by Ono, S. Search for Related Content PubMed PubMed Citation Articles by Ono, K. Articles by Ono, S.

Caenorhabditis elegans Kettin, a Large Immunoglobulin-like Repeat Protein, Binds to Filamentous Actin and Provides Mechanical Stability to the Contractile Apparatuses in Body Wall Muscle

Department of Pathology, Emory University, Atlanta, GA 30322

Submitted February 7, 2006; Revised March 9, 2006; Accepted March 23, 2006
Monitoring Editor: Thomas Pollard

	ABSTRACT

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
Kettin is a large actin-binding protein with immunoglobulin-like (Ig) repeats, which is associated with the thin filaments in arthropod muscles. Here, we report identification and functional characterization of kettin in the nematode Caenorhabditis elegans. We found that one of the monoclonal antibodies that were raised against C. elegans muscle proteins specifically reacts with kettin (Ce-kettin). We determined the entire cDNA sequence of Ce-kettin that encodes a protein of 472 kDa with 31 Ig repeats. Arthropod kettins are splice variants of much larger connectin/titin-related proteins. However, the gene for Ce-kettin is independent of other connectin/titin-related genes. Ce-kettin localizes to the thin filaments near the dense bodies in both striated and nonstriated muscles. The C-terminal four Ig repeats and the adjacent non-Ig region synergistically bind to actin filaments in vitro. RNA interference of Ce-kettin caused weak disorganization of the actin filaments in body wall muscle. This phenotype was suppressed by inhibiting muscle contraction by a myosin mutation, but it was enhanced by tetramisole-induced hypercontraction. Furthermore, Ce-kettin was involved in organizing the cytoplasmic portion of the dense bodies in cooperation with -actinin. These results suggest that kettin is an important regulator of myofibrillar organization and provides mechanical stability to the myofibrils during contraction.

	INTRODUCTION

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
In muscle cells, the actin cytoskeleton is highly differentiated to form the myofibrils that are specialized for producing contractile forces. In addition to actin and myosin as the essential contractile components, regulatory components for the contractile activity are integrated into the structure (Squire, 1997). Despite the fact that many myofibrillar components have been identified, little is known about how these components functionally interact to assemble and maintain the myofibrils in living cells (Littlefield and Fowler, 1998; Gregorio and Antin, 2000; Clark et al., 2002). In particular, the assembly process of actin filaments is complex. During development, actin-monomer binding proteins, including profilin, and actin depolymerizing factor/cofilin regulate actin filament dynamics (Obinata, 1993; Obinata et al., 1997; Ono, 2003a, b). However, in mature myofibrils, these proteins are no longer major components of the thin filaments, and filament binding proteins, such as tropomyosin and -actinin, and end-capping proteins, such as CapZ and tropomodulin, become the major actin-associated proteins. However, the list of actin binding proteins in muscle is still growing and cellular functions of many of these proteins are not clearly understood.

Kettin is a large protein of 500-700 kDa found in the Z-discs and the I-bands of arthropod muscles (Bullard et al., 2000; Bullard et al., 2002, 2006). Kettin directly binds to actin filaments with high-affinity (Lakey et al., 1993; Maki et al., 1995; van Straaten et al., 1999). Proteolytic removal of kettin by calpain from the Z-discs causes disintegration of the Z-discs (Lakey et al., 1993) and decrease in stiffness of the myofibrils (Kulke et al., 2001b). Kettin is one of the first proteins to colocalize with actin during the early stages of myofibrillogenesis (Ayme-Southgate et al., 2004), and genetic analysis has shown that it is essential for myofibril assembly in the fruit fly (Hakeda et al., 2000). The sequence of kettin contains 35 immunoglobulin-like (Ig) repeats separated by short linker sequences (Hakeda et al., 2000; Kolmerer et al., 2000) and is related to the connectin/titin family of giant elastic proteins (Maruyama, 1997; Gautel et al., 1999; Gregorio et al., 1999; Maruyama and Kimura, 2000; Granzier et al., 2002). However, kettin does not have fibronectin-like, elastic PEVK, or kinase domains, and seems to be a uniquely evolved member of the connectin/titin family of proteins. Importantly, recent molecular genetic studies have shown that kettin is a splice variant of connectin/titin in Drosophila (Machado and Andrew, 2000; Zhang et al., 2000) and crayfish (Fukuzawa et al., 2001). Therefore, the previously reported phenotype of the Drosophila kettin mutants (Hakeda et al., 2000) may be partly due to a defect in the D-titin gene.

Based on sequence homology, a gene coding for a kettin-like protein has been found in the nematode Caenorhabditis elegans (Hakeda et al., 2000; Kolmerer et al., 2000). Transcripts of this gene are expressed in various muscle cells, and a monoclonal antibody (mAb) against insect kettin reacts with the dense bodies in obliquely striated body wall muscle (Kolmerer et al., 2000), which is equivalent to the Z-lines in cross-striated muscle. However, the product of the C. elegans kettin-like gene has not been extensively studied at the protein level. In this study, we show that the antigen of MH44, one of monoclonal antibodies raised against C. elegans muscle proteins, is kettin (Francis and Waterston, 1985; Ono et al., 2006). Unlike arthropods, the C. elegans kettin gene is independent of other connectin/titin-related genes, and genetic manipulation of kettin can be applied without affecting them. Our functional analysis of C. elegans kettin suggests that kettin is an important regulator of actin organization and myofibril stability in muscle cells.

	MATERIALS AND METHODS

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
Nematode Strains
Wild-type C. elegans strain N2; an RNA interference (RNAi)-sensitive strain, NL2099 rrf-3(pk1426) (Simmer et al., 2002); and a myosin heavy chain mutant unc-54(s95) (Moerman et al., 1982) were obtained from the Caenorhabditis Genetics Center (Minneapolis, MN). An -actinin mutant, atn-1(ok84), was provided by Drs. Gary Moulder and Robert Barstead (Oklahoma Medical Research Foundation, Oklahoma City, OK). Nematodes were grown under standard conditions at 20°C (Brenner, 1974).

Immunoprecipitation and Microsequencing
During the process of purifying actin from C. elegans (Ono, 1999), high salt/ATP extracts that are enriched with the thin filament proteins were saved and used for immunoprecipitation. Briefly, frozen nematodes were thawed in a homogenizing buffer (50 mM NaCl, 1 mM EDTA, 20 mM Tris-HCl, 1 mM dithiothreitol, and 1 mM phenylmethylsulfonyl fluoride [PMSF], pH 8.0) and homogenized by passing twice through a French pressure cell at 360-580 kg/cm². The homogenate was centrifuged at 10,000 x g for 10 min, and the pellet was washed twice with the homogenizing buffer. The washed pellet was extracted twice with 1 volume of a high salt/ATP buffer (0.6 M KCl, 5 mM ATP, 5 mM MgCl₂, 20 mM Tris-HCl, 0.2 mM EGTA, 1 mM dithiothreitol, and 1 mM PMSF, pH 8.0) and centrifuged at 10,000 x g for 10 min. The supernatant (1 ml) was dialyzed against phosphate-buffered saline (PBS) overnight at 4°C. The extract was cleared by centrifugation at 20,000 x g for 10 min, mixed with 50 µl of 10% Triton X-100 and 5 µl of the mAb MH44 (Francis and Waterston, 1985) (provided by Pamela Hoppe, Western Michigan University, Kalamazoo, MI) in ascites fluid, and incubated on ice for 2 h. Then, 30 µl of protein G-agarose beads (Pierce Chemical, Rockford, IL) that had been washed with PBS was added and incubated for 90 min at 4°C with gentle mixing. The beads were recovered by brief centrifugation at 5000 x g and washed three times with 1 ml each of PBS containing 0.5% Triton X-100 and twice with 1 ml each of PBS. The bound proteins were eluted with 50 µl of SDS-lysis buffer (2% SDS, 80 mM Tris-HCl, 5% -mercaptoethanol. 15% glycerol, and 0.05% bromophenol blue, pH 6.8) at 97°C for 2 min.

The immunoprecipitates were resolved by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and analyzed by silver staining (Figure 1) or Coomassie blue staining for microsequencing. The 60- to 62-kDa bands were excised together from the gel and submitted to ProtTech (Fairview Village, PA) for identification of the protein following their standard procedure. Briefly, the protein in the gel piece was digested with trypsin in 50 mM ammonium bicarbonate at pH 8.5, and the peptides were extracted by 3–5 volumes of acetonitrile, dried, and dissolved in 0.5% acetic acid. The peptides were analyzed by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). The MS/MS data were subjected to homology search against the protein database and manually analyzed for the quality of the results.

cDNA Cloning and Sequencing
Total C. elegans RNA was prepared from N2 using a TRI reagent (Sigma-Aldrich, St. Louis, MO). Fragments (1-2 kb) of the Ce-kettin cDNA were amplified with reverse transcriptase (RT)-PCR using a SuperScript III one-step RT-PCR with Platinum Taq DNA polymerase (Invitrogen, Carlsbad, CA) with primers listed in Supplemental Table 1. Nematode mRNAs often have the SL1 trans-spliced leader sequence at their 5' ends. Therefore, the 5' end of the Ce-kettin mRNA was amplified by PCR using SL1 as a forward primer (Fr-1 in Supplemental Table 1). They were cloned into a pCR-II plasmid vector using a TOPO-TA cloning kit (Invitrogen), and the sequences were determined by DNA sequencing. The sequences were manually assembled into a contiguous full-length cDNA sequence.

Fluorescence Microscopy
For immunofluorescent staining of adult body wall muscle in Figure 3, adult worms were cut in halves near the vulva by needles on poly-lysine–coated slides and permeabilized by a freeze-crack method (Epstein et al., 1993). The gonads were dissected by cutting adult hermaphrodites at the level of pharynx on poly-lysine–coated slides as described previously (Rose et al., 1997). Worm embryos were obtained by cutting gravid adults on poly-lysine–coated slides and permeabilized by a freeze-crack method. These samples were fixed by an optimal method and stained with antibodies as listed in Table 1. Immunofluorescent staining of adult body wall muscle in Figure 8 was performed by a whole-mount staining procedure as described previously (Finney and Ruvkun, 1990). When the host animals of the primary antibodies were different, they were mixed and reacted with the samples simultaneously, and followed by treatments with appropriate fluorescently labeled secondary antibodies (Table 1). We also succeeded in differentially labeling two mouse monoclonal antibodies by using secondary antibodies that distinguish IgG isotypes. MH44 is IgG2a, and mouse monoclonal antibodies of the IgG1 isotype were used for simultaneous staining with MH44. The samples were first treated with mixture of mouse IgG1 antibody and rabbit or guinea pig antibody, and then with secondary antibodies (nonspecific for IgG isotypes). They were washed with PBS and blocked with 0.1 mg/ml mouse IgG (Rockland, Gilbertsville, PA) in 1% bovine serum albumin in PBS for 10 min and reacted with MH44. Then, MH44 was visualized by Zenon Alexa Fluor mouse IgG2a labeling reagents (Invitrogen) (Table 1).

Samples were viewed by epifluorescence using a Nikon Eclipse TE2000 inverted microscope with a 40 or 60x CFI Plan Fluor objective. Images were captured by a SPOT RT monochrome charge-coupled device camera (Diagnostic Instruments, Sterling Heights, MI) and processed by the IPLab imaging software (Scanalytics, Rockville, MD) and Adobe Photoshop 6.0 (Adobe Systems, Mountain View, CA).

Preparation of Recombinant Ce-Kettin Fragments
To construct an expression vector for KETN-CT1, a cDNA fragment encoding residues 3830-4250 was amplified by PCR using primers 5'-GATCGGATCCCAAGCTCCACCGACAATCTCCC and 5'-GATCGGTACCCTAGCGACTGAGTGTGAGCTTG that have added BamHI and KpnI restriction sites (underlined), respectively. The PCR product was digested by BamHI and KpnI and ligated with pQE-30 (QIAGEN, Valencia, CA) at BamHI–KpnI cloning sites. Expression of a 6xHis-tagged protein from this vector was not successful. Therefore, the cDNA fragment was excised from the vector by BamHI and SmaI and ligated with pGEX-2T (GE Healthcare, Little Chalfont, Buckinghamshire, United Kingdom) at BamHI–SmaI cloning sites. The cDNA insert was entirely sequenced to verify that there were no PCR-induced mutations.

To construct an expression vector for KETN-CT2, two cDNA fragments CT2-1 and CT2-2 that overlap by 22 base pairs were amplified by RT-PCR. Primers for CT2-1 were 5'-GGTTCCGCGTGGATCCAGACAGACCAAGTTGAGACCGGC and 5'-GGGAGATTGTCGGTGGAGCTTG. Primers for CT2-2 were 5'-CAAGCTCCACCGACAATCTCCC and 5'-TCACGATGAATTCCCCTAGCGACTGAGTGTGAGCTTG. Fifteen or 16 base pairs of overlapping sequences with pGEX-2T were designed at the 5' and 3' ends of CT2-1 and CT2-2 (underlined), respectively. CT2-1, CT2-2, and pGEX-2T that had been cut by BamHI and SmaI were fused at their homologous ends by an In-fusion PCR cloning kit (Clontech). The cDNA insert was entirely sequenced to verify that there were no PCR-induced mutations.

To construct an expression vector for KETN-CT3, a cDNA fragment encoding residues 3554-3831 was amplified from pGEX-KETN-CT2 by PCR using primers 5'-GGTTCCGCGTGGATCCAGACAGACCAAGTTGAGACCGGC and 5'-TCACGATGAATTCCCTCAAGCTTGCTTAGATTGCCCGATCTTTG. Fifteen or 16 base pairs of overlapping sequences with pGEX-2T were added at the 5' and 3' ends (underlined). The PCR product and pGEX-2T that had been cut by BamHI and SmaI were fused at their homologous ends by an In-fusion PCR cloning kit (Clontech). The cDNA insert was entirely sequenced to verify that there were no PCR-induced mutations.

KETN-CT1, KETN-CT2, and KETN-CT3 were expressed in Escherichia coli as glutathione S-transferase (GST)-fusion proteins and purified by the same method. The E. coli strain BL21 (DE3) was transformed with the expression vector and cultured in M9ZB medium containing 50 µg/ml ampicillin at 37°C until absorbance at 600 nm reached 0.6 cm^–1. Then, the culture was cooled to room temperature, and protein expression was induced by adding 0.1 mM isopropyl -D-thiogalactopyranoside for 3 h at room temperature. The cells were harvested by centrifugation at 5000 x g for 10 min and disrupted by a French pressure cell at 360-580 kg/cm² in PBS containing 0.2 mM dithiothreitol and 0.4 mM PMSF. The homogenates were centrifuged at 20,000 x g for 15 min, and the supernatants were applied to a glutathione-Uniflow column (bed volume of 1 ml) (Clontech). The columns were washed by 10 column volumes of PBS and bound proteins were eluted with 10 mM glutathione, 20 mM Tris-HCl, 0.2 mM dithiothreitol, pH 8.0. Fractions containing the GST-fusion proteins were dialyzed against 0.1 M KCl, 20 mM MES-KOH, and 0.2 mM dithiothreitol, pH 6.0, and purified further with Mono S column chromatography. The proteins were eluted from the Mono S column with a linear KCl gradient of 0.1–0.5 M and dialyzed overnight against 0.1 M KCl, 2 mM MgCl₂, 20 mM HEPES-NaOH, and 0.2 mM dithiothreitol, pH 7.5. Protein concentrations were determined by a BCA Protein Assay kit (Pierce Chemical).

Actin Binding Assay
Rabbit muscle actin was prepared as described previously (Pardee and Spudich, 1982), and its binding with the kettin fragments was examined by a copelleting assay as described previously (Mohri and Ono, 2003; Mohri et al., 2004) with modifications. GST-KETN-CT1, GST-KETN-CT2, or GST-KETN-CT3 (all 0-30 µM0 was incubated with or without 5 µM F-actin in a buffer containing 0.1 M KCl, 2 mM MgCl₂, 1 mM dithiothreitol, and 20 mM HEPES-NaOH, pH 7.5, for 30 min at room temperature and ultracentrifuged at 80,000 rpm for 20 min in a Beckman TLA-100 rotor. The supernatants and pellets were adjusted to the same volumes and analyzed by SDS-PAGE. Gels were stained with Coomassie brilliant blue R-250 (National Diagnostics, Atlanta, GA), scanned by a UMAX Powerlook III scanner at 300 dpi, and the band intensity was quantified by Scion Image Beta 4.02 (Scion, Frederick, MD). To quantify the amounts of the kettin fragments that bound to actin, the amounts of nonspecific sedimentation of the kettin fragments were determined from control experiments without F-actin and subtracted from the data of the assays with actin.

RNA Interference Experiments
Nematodes were treated with RNAi for ketn-1 by feeding E. coli expressing double-stranded RNA under the conditions as described previously (Ono and Ono, 2002). The RNAi clone for ketn-1 (V-2F01) was obtained from the C. elegans RNAi library from Geneservice (Cambridge, United Kingdom) (Kamath et al., 2003). Control experiments were performed with the E. coli strain HT115 (DE3) that was transformed with an empty RNAi vector L4440 (Timmons and Fire, 1998; Timmons et al., 2001). Phenotypes were analyzed in their F1 generation. Staining of worms with tetramethylrhodamine-phalloidin was performed as described previously (Ono, 2001). For tetramisole treatment, worms were harvested by M9 buffer, washed once with M9 buffer, and incubated in 10 ml M9 buffer with or without 0.01% tetramisole (MP Biomedicals) for 1 h at room temperature on a nutator. To determine brood size, F1 RNAi-treated worms were isolated at the L4 larval stage in individual plates, and the number of progeny was counted by removing the progeny from the plates until the worms cease producing progeny.

Protein Electrophoresis and Western Blot
Fifty adult worms were lysed in 20 µl of SDS-lysis buffer (2% SDS, 80 mM Tris-HCl, 5% -mercaptoethanol, 15% glycerol, and 0.05% bromophenol blue, pH 6.8), heated at 97°C for 2 min, homogenized by brief sonication, and heated again at 97°C for 2 min. The samples were resolved by SDS-PAGE using a 4 or 5% acrylamide gel and transferred onto a polyvinylidene difluoride membrane (Immobilon-P; Millipore, Billerica, MA) using a Genie Blotter (Idea Scientific, Minneapolis, MN). The membrane was blocked in 5% nonfat milk in PBS containing 0.1% Tween 20 for 30 min and incubated with MH44 (1/2000-diluted ascites fluid) for 1 h followed by treatment with peroxidase-labeled goat anti-mouse IgG (Pierce Chemical). The reactivity was detected with a SuperSignal chemiluminescence reagent (Pierce Chemical). The membrane was treated with a buffer containing 2% SDS, 100 mM -mercaptoethanol, and 62.5 mM Tris-HCl, pH 6.8, at 50°C for 30 min to remove bound probes, and reprobed with mouse monoclonal anti-myoA antibody (5-6) as a loading control.

	RESULTS

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
Identification of the Antigen for the Monoclonal Antibody MH44 as C. elegans Kettin
Francis and Waterston (1985) generated the mAb MH44 and reported that its antigen was a 400- to 440-kDa protein and localized to the I-bands in C. elegans body wall muscle. We confirmed by Western blot that MH44 specifically reacted with this high-molecular-weight protein with very weak reactivity with smaller proteins that could be proteolytic products or unknown splice variants of the major band (Ono et al., 2006). Although MH44 has been used as a marker for the I-bands, the MH44 antigen had not been molecularly identified. To determine the molecular nature of the MH44 antigen, we isolated this protein from the crude thin filament fraction by immunoprecipitation (Figure 1). In three independent experiments, no high-molecular-weight proteins of 400-440 kDa were recovered. Instead, two 60- to 62-kDa proteins were reproducibly precipitated by MH44 (Figure 1, lane 1). We determined partial peptide sequence of these proteins by LC-MS/MS analysis and identified 27 tryptic peptides (Supplemental Table 2) that corresponded to the sequence of a putative C. elegans protein F54E2.3 (GenBank/European Molecular Biology Laboratory [EMBL]/DNA Data Bank of Japan [DDBJ] accession no. AAC78200) with a predicted M_r of 500 K, suggesting that the isolated proteins were proteolytic fragments of this large protein.

View larger version (66K): [in this window] [in a new window]   Figure 1. Immunoprecipitation of the MH44 antigen. Immunoprecipitates with MH44 (lane 1) and control precipitates in the absence of MH44 (lane 2) were analyzed by SDS-PAGE (5% acrylamide gel) and silver staining. There were no specific bands around 400-500 kDa, Instead, two bands of 60-62 kDa (arrows) were detected in the precipitates with MH44. These bands were subjected to microsequencing. Molecular mass markers in kilodaltons (lane M) are indicated on the left of the gel.

Ce-kettin is composed of 31 Ig-repeats (Figure 2, gray region) and a unique kettin-specific sequence that is located between the 27th and 28th repeats (Figure 2). All the Ig-repeats have been accurately predicted by Kolmerer et al., (2000), and they are separated by weakly conserved linker sequences. Previous genome-wide analyses of Ig-repeat proteins in C. elegans did not annotate the Ce-kettin gene correctly (Teichmann and Chothia, 2000; Vogel et al., 2003) due to lack of information on the cDNA sequence. In addition, this gene has been predicted to generate a protein with a prion-like-Q/N-rich (PQN) domain at the N terminus and designated as pqn-43 in the WormBase (Chen et al., 2005) and the sequence database (GenBank/EMBL/DDBJ accession no. NP_503758). However, our cDNA sequence does not contain the PQN sequence in the open reading frame. Therefore, we propose that ketn-1 is an appropriate designation for the Ce-kettin gene.

View larger version (19K): [in this window] [in a new window]   Figure 2. Domain structure of Ce-kettin. Ig domains are shown in gray. The C-terminal fragments KETN-CT1, KETN-CT2, and KETN-CT3 were bacterially produced as fusion proteins with GST and used in in vitro assays in Figure 6. These Ce-kettin fragments were also tested for reactivity with MH44 on Western blot. The reactivity (+ or –) is shown on the right.

Localization of Ce-Kettin to the Thin Filaments in Striated and Nonstriated Muscle
MH44 was previously shown to label the entire I-bands in body wall muscle (Francis and Waterston, 1985). We reexamined intracellular localization of Ce-kettin by double or triple staining with other cytoskeletal markers and found that it localized to a portion, not the entire length, of the I-bands (Figure 3). Triple staining of body wall muscle for actin (thin filaments), Ce-kettin (MH44), and myosin heavy chain (thick filaments) confirmed that Ce-kettin is associated with the thin filaments (Figure 3, A, D, G, and J). However, Ce-kettin localized to a ladder-like pattern and its localization was limited to a narrow region in the middle of the bands of actin (Figure 3, compare D–F for Ce-kettin with A–C for actin). Triple staining for actin, Ce-kettin, and vinculin (dense bodies) showed that Ce-kettin has some overlap with vinculin, but the center of the dense bodies was devoid of Ce-kettin (Figure 3, B, E, H, and K). In addition, comparison with the location of tropomyosin showed that tropomyosin localized to the outer region on the thin filaments with minimal overlap with Ce-kettin (Figure 3, C, F, I, and L). These results indicate that Ce-kettin is associated with a portion of the thin filaments near the dense bodies.

View larger version (63K): [in this window] [in a new window]   Figure 3. Localization of Ce-kettin in adult body wall muscle. Adult body wall muscle was stained for actin (A–C), Ce-kettin (D–F), and myoA myosin heavy chain (G), vinculin (H), or tropomyosin (I). Merged images of actin (red), Ce-kettin (green), and myoA, vinculin, or tropomyosin (blue) are shown in J–L. Bar, 10 µm.

In addition, Ce-kettin was expressed in nonstriated muscles, including the pharynx, the vulva, and the myoepithelial sheath of the proximal ovary (Figure 4). In particular, Ce-kettin was associated with the actin filaments in spots adjacent to the dense bodies (Figure 4, A–D) in the ovarian myoepithelial sheath that expresses the same myosin heavy chain isoform as the body wall muscle (Ardizzi and Epstein, 1987) and uses tropomyosin and troponin for regulation of contraction (Ono and Ono, 2004). Differential localization of tropomyosin and Ce-kettin on the actin filaments was more clearly observed in this nonstriated muscle (Figure 4, E–H). Tropomyosin was associated with the entire length of the actin filaments (Figure 4G), whereas Ce-kettin localized to spots that are associated with the actin filaments (Figure 4F). Observation at a higher magnification revealed that tropomyosin is not detected where Ce-kettin is located (Figure 4, I–L, arrows). These localization patterns suggest that tropomyosin and Ce-kettin bind to actin in a mutually exclusive manner.

View larger version (81K): [in this window] [in a new window]   Figure 4. Localization of Ce-kettin in ovarian nonstriated muscle. Myoepithelial sheath of the proximal ovary was stained for actin (A, E, and I), Ce-kettin (B, F, and J), and vinculin (C) or tropomyosin (G and K). Merged images of actin (red), Ce-kettin (green), and vinculin or tropomyosin (blue) are shown in D, H, and L. High-magnification images in I–L show a representative area where differential localization of Ce-kettin and tropomyosin is clearly observed (arrows). Bars, 10 µm (A–H) and 5 µm (I–L).

View larger version (71K): [in this window] [in a new window]   Figure 5. Localization of Ce-kettin in embryos. Embryos at the comma (A–C), twofold (D–I), and threefold (J–O) stages were stained for Ce-kettin (A, D, G, J, and M) and actin (B, E, H, K, and N). Merged images of Ce-kettin (green) and actin (red) are shown in C, F, I, L, and O. Focus was adjusted for the body wall muscle in D–F and J–L or the pharynx in G–I and M–O. Actin-rich structure in H (asterisk) is the nerve ring. Bar, 10 µm.

KETN-CT1, KETN-CT2, and KETN-CT3 bound to F-actin with different affinity and stoichiometry (Figure 6). In cosedimentation assays, significant portions of GST-KETN-CT1, GST-KETN-CT2, or GST-KETN-CT3, cosedimented with F-actin (Figure 6, A–C). GST alone did not cosediment with actin under the same conditions, and nonspecific trapping of GST in the pellets was very minor (Figure 6D) (Mohri et al., 2004). Quantitative analysis of the data showed that KETN-CT2 bound to F-actin with higher affinity (K_d = 0.68 ± 0.062 µM) than KETN-CT1 (K_d = 0.93 ± 0.36 µM) or KETN-CT3 (K_d = 5.5 µM ± 1.2 µM). Also interestingly, binding was saturated for KETN-CT2 or KETN-CT3 at higher stoichiometry (mol KETN-CT2/mol actin = 0.34 ± 0.0080 or 3:1; mol KETN-CT3/mol actin = 0.42 ± 0.029 or 2.4:1) than for KETN-CT1 (mol KETN-CT1/mol actin = 0.15 ± 0.016 or 6.7:1) (Figure 6E). These results suggest that the kettin-specific region augments the actin binding activity of the Ig-repeats.

View larger version (42K): [in this window] [in a new window]   Figure 6. Binding of the C-terminal fragments of Ce-kettin with actin filaments in vitro. Various concentrations of GST-KETN-CT1 (A), GST-KETN-CT2 (B), GST-KETN-CT3 (C), or GST (D) were incubated with or without 5 µM F-actin, and their interactions were examined by copelleting assays. The samples were fractionated into supernatants (s) and pellets (p) and analyzed by SDS-PAGE. Positions of actin (A), Ce-kettin fragments (K), and GST (G) are indicated on the right of the gels. The data were quantified by densitometric analysis (E).

View larger version (82K): [in this window] [in a new window]   Figure 7. Disorganization of actin filaments in adult body wall muscle by RNA interference of Ce-kettin. (A) Protein levels of Ce-kettin in control or ketn-1 (RNAi) worms (50 worms per lane) in wild-type or rrf-3 background were examined by Western blot with MH44. The same membrane was reprobed with anti-myoA antibody to confirm equal loading of the proteins. (B) Frequency of formation of actin aggregates. Worms were stained with tetramethylrhodamine-phalloidin, and percentages of adult worms (n = 100) with actin aggregates in the body wall muscle were determined. (C–H) Actin organization in the body wall muscle of control RNAi (C, E, G, I, and K) or ketn-1 (RNAi) (D, F, H, J, and L) worms in wild-type (C, D, and I–L), rrf-3 (E and F), or unc-54 (G and H) backgrounds was examined by staining with tetramethylrhodamine-phalloidin. Worms in I–L were incubated in M9 buffer for 1 h in the absence (I and J) or presence (K and L) of 0.01% tetramisole before fixation. In ketn-1 (RNAi) worms, small round aggregates and unusual actin accumulations at the edges of muscle cells (arrows in D, F, and J) were detected, and this phenotype was enhanced by tetramisole-induced hypercontraction (L). Bar, 50 µm.

Ce-Kettin Regulates Localization of Tropomyosin and -Actinin
In vitro studies have shown that insect kettin binds to -actinin, whereas it competes with tropomyosin for binding to actin (Lakey et al., 1993; van Straaten et al., 1999), but their functional relationship in vivo is not understood. We examined how Ce-kettin interacts with tropomyosin and -actinin in the C. elegans body wall muscle. As shown in Figure 3, tropomyosin is normally localized to the outer region on the thin filaments. In worms treated with control RNAi, the normal localization of tropomyosin as double lines was observed (Figure 8A, a). However, in ketn-1(RNAi) worms, tropomyosin also localized to regions where Ce-kettin normally localizes, resulting in the ladder-like localization (Figure 8A, d). This result strongly suggests that Ce-kettin and tropomyosin compete for binding to actin in vivo.

View larger version (74K): [in this window] [in a new window]   Figure 8. Functional interaction between Ce-kettin and -actinin in the body wall muscle. (A) Tropomyosin (a and d), -actinin (g and j), vinculin (m and p), or myoA myosin heavy chain (s and v) was double-stained with actin (b, e, h, k, n, q, t, and w) in the body wall muscle of control or ketn-1(RNAi) adult worms. Merged images are shown (c, f, i, l, o, r, u, and x). (B) Ce-kettin (a) and actin (b) were immunolocalized in the atn-1(ok84) homozygous worms. (C) Actin filaments in the body wall muscle of the atn-1(ok84) worms with control RNAi (a) or ketn-1(RNAi) (b) were stained with tetramethylrhodamine-phalloidin. Bars, 10 µm (A), 20 µm (B), and 50 µm (C).

The functional relationship between Ce-kettin and -actinin was further examined in an -actinin mutant (Figure 8, B and C). atn-1(ok84) has a 1.1-kb deletion in the single gene for -actinin atn-1 (Barstead et al., 1991), is homozygous viable, and shows only minor alterations in the striated arrangement of actin filaments and small aggregations of actin at the edges of the body wall muscle cells (Moulder and Barstead, personal communication) (Figure 8B, b). Position of the atn-1(ok84) deletion suggests that a truncated -actinin protein containing the N-terminal actin binding domain could be expressed, but the presence of such a truncated protein has not been confirmed (Moulder and Barstead, personal communication). In the -actinin mutant, Ce-kettin colocalized with actin to the striated myofibrils, but the pattern of Ce-kettin was continuous (Figure 8B, a) rather than ladder-like (Figure 3). This is probably because the cytoplasmic portion of the dense bodies may not be well defined, in which -actinin is the major component. Ce-kettin was not associated with the actin aggregates in the -actinin mutant (Figure 8B, a–c). Furthermore, when the -actinin mutant was treated with ketn-1(RNAi), disorganization of the actin filaments was enhanced and larger actin aggregates were often detected (Figure 8C, compare a and b). These results suggest that Ce-kettin and -actinin cooperate to organize the dense bodies and the thin filaments.

	DISCUSSION

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
In this study, we identified the C. elegans kettin gene and the gene product as the antigen for the mAb MH44 that has been used as a marker for the I-bands in the C. elegans muscle. Comparisons of the localization pattern of Ce-kettin with that of other thin filament proteins revealed that Ce-kettin is associated with the thin filaments near the dense bodies, the homologous structures to the Z-discs in cross-striated muscles. Biochemical analysis showed that the four C-terminal Ig domains of Ce-kettin directly bind to actin filaments in vitro and that the kettin-specific sequence immediately N-terminal to these Ig domains enhances its actin binding activity. RNAi of Ce-kettin caused disorganization of actin filaments in body wall muscle. This phenotype was suppressed by reducing muscle contraction, but enhanced by hypercontraction. RNAi of Ce-kettin also disturbed organization of -actinin at the dense bodies and enhanced the actin disorganization phenotype in an -actinin mutant. These results suggest that Ce-kettin is important for maintaining organized architecture of the actin filaments and dense bodies and provides mechanical stability to the contractile apparatuses in muscle cells.

Localization of Ce-kettin on the thin filaments was proximal to the dense bodies and was similar to that of kettins from insects (Lakey et al., 1990, 1993; van Straaten et al., 1999) and crayfish (Maki et al., 1995; Fukuzawa et al., 2001), which are localized to the side of the Z-discs. In addition, the N terminus of insect kettin is located within the Z-discs (van Straaten et al., 1999). Because MH44 recognizes the C terminus of Ce-kettin, the N terminus of Ce-kettin is likely to be embedded in the dense bodies. This limited localization of kettin is probably due to competition with tropomyosin for binding to actin (van Straaten et al., 1999), because Ce-tropomyosin is more distally localized on the thin filaments (Figures 3 and 4). We also found that Ce-kettin localizes to the proximal region of the thin filaments in the ovarian nonstriated muscle (Figure 4). This is the first demonstration of kettin as a component of nonstriated myofibrils. Although the C. elegans ovarian muscle is nonstriated, it shares some physiological properties with striated muscle and uses the tropomyosin–troponin system for its contraction (Myers et al., 1996; Ono and Ono, 2004). Therefore, Ce-kettin may play common cellular roles in both striated and nonstriated muscles.

We showed that the four C-terminal Ig-repeats directly bind to actin filaments and that the adjacent kettin-specific region enhances its actin binding. Previously, the full-length kettin has been demonstrated to bind to actin filaments with high affinity (Maki et al., 1995; van Straaten et al., 1999), and the stoichiometry has suggested that one Ig-repeat may bind one actin monomer in the filament (van Straaten et al., 1999). This was also supported by the report that a single Ig-repeat of kettin is capable of binding to actin filaments (Lakey et al., 1993). However, our results show that the four C-terminal Ig-repeats (KETN-CT1) bind to actin at lower stoichiometry than one repeat per one actin monomer, and, interestingly, that the adjacent non-Ig region augments both affinity and stoichiometry for binding to actin. This suggests that the Ig-repeats and non-Ig region of the molecule cooperatively bind to actin filaments. Similarly, a single Ig-domain of myotilin is sufficient for actin binding, but flanking non-Ig sequences also play important roles in actin binding (von Nandelstadh et al., 2005). The full-length kettin binds to actin with a nanomolar affinity (van Straaten et al., 1999), whereas our C-terminal fragments binds to actin with a micromolar affinity, suggesting that other Ig-repeats and non-Ig sequence may cooperate to achieve tight binding to actin filaments with proper stoichiometry.

The Ce-kettin gene ketn-1 is independent of genes coding for other connectin/titin-related Ig-repeat proteins. ketn-1 (RNAi) caused disorganization of actin filaments in muscle. This phenotype is different from the defects in regulation of muscle contraction in the mutants of unc-22 coding for twitchin (Benian et al., 1993) and the defects in M-line assembly in the mutants of unc-89 coding for UNC-89, a protein similar to obscurin (Benian et al., 1996; Small et al., 2004). Therefore, the RNAi phenotype strongly suggests that Ce-kettin has specific function in assembly and/or maintenance of actin filaments in muscle. However, the phenotype is relatively weak with low penetrance under normal culture conditions, and the extent of actin disorganization was not as drastic as that observed in mutants of actin depolymerizing factor/cofilin (UNC-60B) (Ono et al., 1999, 2003), actin-interacting protein 1 (UNC-78) (Ono, 2001), or a calponin-like protein (UNC-87) (Goetinck and Waterston, 1994a,b), or in worms that are treated with RNAi of tropomyosin (Ono and Ono, 2002). This suggests that kettin might have partially redundant function with other muscle proteins. Ce-titins are candidates for functionally redundant proteins with Ce-kettin. The N-terminal portion of Ce-titins localizes to the I-bands (Flaherty et al., 2002), but mutant or RNAi phenotypes for the Ce-titin gene have not been clearly defined. Vertebrate connectin/titin directly binds to actin filaments (Kimura et al., 1984; Maruyama et al., 1987) via the PEVK domain in the I-band part (Kulke et al., 2001a; Yamasaki et al., 2001; Linke et al., 2002; Nagy et al., 2004) and is involved in maintenance of the thin filament structure (Linke et al., 1999). Thus, vertebrate connectin/titin may have a similar actin regulatory function to kettin by using a different domain from kettin for binding to actin filaments.

We demonstrated that the organization of -actinin at the dense bodies was disturbed by depletion of Ce-kettin. This suggests that Ce-kettin may directly interact with -actinin and regulate its assembly, or that Ce-kettin may organize actin filaments near the barbed ends, possibly by bundling, and facilitate efficient association with the dense bodies. -Actinin and insect kettin have been shown to bind to actin simultaneously (van Straaten et al., 1999). Thus, these two proteins may cooperate to strengthen the anchorage between thin filaments and dense bodies and provide mechanical stability. Insect kettin also binds to myosin and is involved in stiffness of myofibrils (Kulke et al., 2001b). Although we have not examined interaction between Ce-kettin and myosin, it is also a possible mechanism to stabilize the myofibrils.

Kettin is a unique member of the connectin/titin family of Ig-repeat proteins and is found only in invertebrates (Bullard et al., 2002). However, kettin might be functionally homologous to palladin (Parast and Otey, 2000), myopalladin (Bang et al., 2001), and myotilin (Salmikangas et al., 1999), which have two to five Ig-repeats and localize to the Z-lines of vertebrate striated muscle. These proteins are critical for actin filament reorganization in nonmuscle cells (Boukhelifa et al., 2001, 2003; Salmikangas et al., 2003; Otey et al., 2005) and myofibril assembly in muscle cells (Bang et al., 2001; Salmikangas et al., 2003; Otey et al., 2005). In particular, myotilin directly binds to actin filaments, and its mutations in the human gene are associated with limb girdle muscular dystrophy 1A (Salmikangas et al., 1999) and myofibrillar myopathy (Selcen and Engel, 2004), which are termed myotilinopathies (Goebel, 2005; Olive et al., 2005). Therefore, C. elegans could be an excellent model to study functions of actin binding proteins with Ig-repeats in muscle and their interaction with other myofibrillar proteins.

	ACKNOWLEDGMENTS

 
We thank Belinda Bullard and Taylor Allen for communicating studies on C. elegans kettin and helpful discussion; Sumiko Kimura for helpful discussion; Guy Benian for comments on the manuscript; Henry Epstein for anti-myoA antibody; Gary Moulder and Robert Barstead for an -actinin mutant; and Pamela Hoppe for MH24, MH40, and MH44. Some C. elegans strains were provided by the Caenorhabditis Genetics Center, which is funded by the National Institute of Health National Center for Research Resources. This work was supported by National Institutes of Health Grant R01 AR48615 (to S. O.).

	Footnotes

 
This article was published online ahead of print in MBC in Press (http://www.molbiolcell.org/cgi/doi/10.1091/mbc.E05-02-0114) on April 5, 2006.

The online version of this article contains supplemental material at MBC Online (http://www.molbiolcell.org).

* Present address: Department of Biophysics, Graduate School of Science, Kyoto University, Kyoto 606-8502, Japan.

Address correspondence to: Shoichiro Ono ( sono{at}emory.edu)

Abbreviations used: GST, glutathione S-transferase; Ig, immunoglobulin-like; RNAi, RNA interference.

	REFERENCES

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
Ardizzi, J. P. and Epstein, H. F. (1987). Immunochemical localization of myosin heavy chain isoforms and paramyosin in developmentally and structurally diverse muscle cell types of the nematode Caenorhabditis elegans. J. Cell Biol 105, 2763–2770.[Abstract/Free Full Text]

Ayme-Southgate, A., Bounaix, C., Riebe, T. E., Southgate, R. (2004). Assembly of the giant protein projectin during myofibrillogenesis in Drosophila indirect flight muscles. BMC Cell Biol 5, 17.[CrossRef][Medline]

Bang, M. L., Mudry, R. E., McElhinny, A. S., Trombitas, K., Geach, A. J., Yamasaki, R., Sorimachi, H., Granzier, H., Gregorio, C. C., Labeit, S. (2001). Myopalladin, a novel 145-kilodalton sarcomeric protein with multiple roles in Z-disc and I-band protein assemblies. J. Cell Biol 153, 413–427.[Abstract/Free Full Text]

Barstead, R. J., Kleiman, L., Waterston, R. H. (1991). Cloning, sequencing, and mapping of an alpha-actinin gene from the nematode Caenorhabditis elegans. Cell Motil. Cytoskeleton 20, 69–78.[CrossRef][Medline]

Benian, G. M., L'Hernault, S. W., Morris, M. E. (1993). Additional sequence complexity in the muscle gene, unc-22, and its encoded protein, twitchin, of Caenorhabditis elegans. Genetics 134, 1097–1104.[Abstract]

Benian, G. M., Tinley, T. L., Tang, X., Borodovsky, M. (1996). The Caenorhabditis elegans gene unc-89, required for muscle M-line assembly, encodes a giant modular protein composed of Ig and signal transduction domains. J. Cell Biol 132, 835–848.[Abstract/Free Full Text]

Boukhelifa, M., Hwang, S. J., Valtschanoff, J. G., Meeker, R. B., Rustioni, A., Otey, C. A. (2003). A critical role for palladin in astrocyte morphology and response to injury. Mol. Cell Neurosci 23, 661–668.[CrossRef][Medline]

Boukhelifa, M., Parast, M. M., Valtschanoff, J. G., LaMantia, A. S., Meeker, R. B., Otey, C. A. (2001). A role for the cytoskeleton-associated protein palladin in neurite outgrowth. Mol. Biol. Cell 12, 2721–2729.[Abstract/Free Full Text]

Brenner, S. (1974). The genetics of Caenorhabditis elegans. Genetics 77, 71–94.[Abstract/Free Full Text]

Bullard, B., Burkart, C., Labeit, S., Leonard, K. (2006). The function of elastic proteins in the oscillatory contraction of insect flight muscle. J. Muscle Res. Cell Motil (in press).

Bullard, B., Goulding, D., Ferguson, C., Leonard, K. (2000). Links in the chain: the contribution of kettin to the elasticity of insect muscles. Adv. Exp. Med. Biol 481, 207–218 discussion 219–220.

Bullard, B., Linke, W. A., Leonard, K. (2002). Varieties of elastic protein in invertebrate muscles. J. Muscle Res. Cell Motil 23, 435–447.[CrossRef][Medline]

Chen, N., et al. (2005). WormBase: a comprehensive data resource for Caenorhabditis biology and genomics. Nucleic Acids Res 33, D383–389.[Abstract/Free Full Text]

Clark, K. A., McElhinny, A. S., Beckerle, M. C., Gregorio, C. C. (2002). Striated muscle cytoarchitecture: an intricate web of form and function. Annu. Rev. Cell Dev. Biol 18, 637–706.[CrossRef][Medline]

Epstein, H. F., Casey, D. L., Ortiz, I. (1993). Myosin and paramyosin of Caenorhabditis elegans embryos assemble into nascent structures distinct from thick filaments and multi-filament assemblages. J. Cell Biol 122, 845–858.[Abstract/Free Full Text]

Finney, M. and Ruvkun, G. (1990). The unc-86 gene product couples cell lineage and cell identity in C. elegans. Cell 63, 895–905.

Flaherty, D. B., Gernert, K. M., Shmeleva, N., Tang, X., Mercer, K. B., Borodovsky, M., Benian, G. M. (2002). Titins in C. elegans with unusual features: coiled-coil domains, novel regulation of kinase activity and two new possible elastic regions. J. Mol. Biol 323, 533–549.[CrossRef][Medline]

Francis, G. R. and Waterston, R. H. (1985). Muscle organization in Caenorhabditis elegans: localization of proteins implicated in thin filament attachment and I-band organization. J. Cell Biol 101, 1532–1549.[Abstract/Free Full Text]

Fukuzawa, A., Shimamura, J., Takemori, S., Kanzawa, N., Yamaguchi, M., Sun, P., Maruyama, K., Kimura, S. (2001). Invertebrate connectin spans as much as 3.5 micron in the giant sarcomeres of crayfish claw muscle. EMBO J 20, 4826–4835.[CrossRef][Medline]

Gautel, M., Mues, A., Young, P. (1999). Control of sarcomeric assembly: the flow of information on titin. Rev. Physiol. Biochem. Pharmacol 138, 97–137.[Medline]

Goebel, H. H. (2005). Congenital myopathies in the new millennium. J. Child Neurol 20, 94–101.[Abstract/Free Full Text]

Goetinck, S. and Waterston, R. H. (1994a). The Caenorhabditis elegans muscle-affecting gene unc-87 encodes a novel thin filament-associated protein. J. Cell Biol 127, 79–93.[Abstract/Free Full Text]

Goetinck, S. and Waterston, R. H. (1994b). The Caenorhabditis elegans UNC-87 protein is essential for maintenance, but not assembly, of bodywall muscle. J. Cell Biol 127, 71–78.[Abstract/Free Full Text]

Granzier, H., Labeit, D., Wu, Y., Labeit, S. (2002). Titin as a modular spring: emerging mechanisms for elasticity control by titin in cardiac physiology and pathophysiology. J. Muscle Res. Cell Motil 23, 457–471.[CrossRef][Medline]

Gregorio, C. C. and Antin, P. B. (2000). To the heart of myofibril assembly. Trends Cell Biol 10, 355–362.[CrossRef][Medline]

Gregorio, C. C., Granzier, H., Sorimachi, H., Labeit, S. (1999). Muscle assembly: a titanic achievement? Curr. Opin. Cell Biol 11, 18–25.[CrossRef][Medline]

Hakeda, S., Endo, S., Saigo, K. (2000). Requirements of Kettin, a giant muscle protein highly conserved in overall structure in evolution, for normal muscle function, viability, and flight activity of Drosophila. J. Cell Biol 148, 101–114.[Abstract/Free Full Text]

Kamath, R. S., et al. (2003). Systematic functional analysis of the Caenorhabditis elegans genome using RNAi. Nature 421, 231–237.[CrossRef][Medline]

Kimura, S., Maruyama, K., Huang, Y. P. (1984). Interactions of muscle beta-connectin with myosin, actin, and actomyosin at low ionic strengths. J. Biochem 96, 499–506.[Abstract/Free Full Text]

Kolmerer, B., et al. (2000). Sequence and expression of the kettin gene in Drosophila melanogaster and Caenorhabditis elegans. J. Mol. Biol 296, 435–448.[CrossRef][Medline]

Kulke, M., Fujita-Becker, S., Rostkova, E., Neagoe, C., Labeit, D., Manstein, D. J., Gautel, M., Linke, W. A. (2001a). Interaction between PEVK-titin and actin filaments: origin of a viscous force component in cardiac myofibrils. Circ. Res 89, 874–881.[Abstract/Free Full Text]

Kulke, M., Neagoe, C., Kolmerer, B., Minajeva, A., Hinssen, H., Bullard, B., Linke, W. A. (2001b). Kettin, a major source of myofibrillar stiffness in Drosophila indirect flight muscle. J. Cell Biol 154, 1045–1057.[Abstract/Free Full Text]

Lakey, A., Ferguson, C., Labeit, S., Reedy, M., Larkins, A., Butcher, G., Leonard, K., Bullard, B. (1990). Identification and localization of high molecular weight proteins in insect flight and leg muscle. EMBO J 9, 3459–3467.[Medline]

Lakey, A., Labeit, S., Gautel, M., Ferguson, C., Barlow, D. P., Leonard, K., Bullard, B. (1993). Kettin, a large modular protein in the Z-disc of insect muscles. EMBO J 12, 2863–2871.[Medline]

Linke, W. A., Kulke, M., Li, H., Fujita-Becker, S., Neagoe, C., Manstein, D. J., Gautel, M., Fernandez, J. M. (2002). PEVK domain of titin: an entropic spring with actin-binding properties. J. Struct. Biol 137, 194–205.[CrossRef][Medline]

Linke, W. A., Rudy, D. E., Centner, T., Gautel, M., Witt, C., Labeit, S., Gregorio, C. C. (1999). I-band titin in cardiac muscle is a three-element molecular spring and is critical for maintaining thin filament structure. J. Cell Biol 146, 631–644.[Abstract/Free Full Text]

Littlefield, R. and Fowler, V. M. (1998). Defining actin filament length in striated muscle: rulers and caps or dynamic stability? Annu. Rev. Cell Dev. Biol 14, 487–525.[CrossRef][Medline]

Machado, C. and Andrew, D. J. (2000). D-Titin: a giant protein with dual roles in chromosomes and muscles. J. Cell Biol 151, 639–652.[Abstract/Free Full Text]

Maki, S., Ohtani, Y., Kimura, S., Maruyama, K. (1995). Isolation and characterization of a kettin-like protein from crayfish claw muscle. J. Muscle Res. Cell Motil 16, 579–585.[CrossRef][Medline]

Maruyama, K. (1997). Connectin/titin, giant elastic protein of muscle. FASEB J 11, 341–345.[Abstract]

Maruyama, K., Hu, D. H., Suzuki, T., Kimura, S. (1987). Binding of actin filaments to connectin. J. Biochem 101, 1339–1346.[Abstract/Free Full Text]

Maruyama, K. and Kimura, S. (2000). Connectin: from regular to giant sizes of sarcomeres. Adv. Exp. Med. Biol 481, 25–33.[Medline]

Miller, D. M., Ortiz, I., Berliner, G. C., Epstein, H. F. (1983). Differential localization of two myosins within nematode thick filaments. Cell 34, 477–490.[CrossRef][Medline]

Moerman, D. G., Plurad, S., Waterston, R. H., Baillie, D. L. (1982). Mutations in the unc-54 myosin heavy chain gene of Caenorhabditis elegans that alter contractility but not muscle structure. Cell 29, 773–781.[CrossRef][Medline]

Mohri, K. and Ono, S. (2003). Actin filament disassembling activity of Caenorhabditis elegans actin-interacting protein 1 (UNC-78) is dependent on filament binding by a specific ADF/cofilin isoform. J. Cell Sci 116, 4107–4118.[Abstract/Free Full Text]