QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

Vol. 18, Issue 9, 3620-3634, September 2007

This Article Abstract Full Text (PDF) All Versions of this Article: E06-10-0917v1 18/9/3620    most recent Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Similar articles in PubMed Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Google Scholar Articles by Sakato, M. Articles by King, S. M. Search for Related Content PubMed PubMed Citation Articles by Sakato, M. Articles by King, S. M.

Chlamydomonas Outer Arm Dynein Alters Conformation in Response to Ca²⁺

Miho Sakato^*,, Hitoshi Sakakibara, and Stephen M. King^*

*Department of Molecular, Microbial, and Structural Biology, University of Connecticut Health Center, Farmington, CT 06030; and Kobe Advanced ICT Research Center, National Institute of Information and Communications Technology, 588-2 Iwaoka, Nishi-ku, Kobe 651-2492, Japan

Submitted October 13, 2006; Revised July 3, 2007; Accepted July 5, 2007
Monitoring Editor: Erika Holzbaur

	ABSTRACT

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
We have previously shown that Ca²⁺ directly activates ATP-sensitive microtubule binding by a Chlamydomonas outer arm dynein subparticle containing the and heavy chains (HCs). The HC–associated LC4 light chain is a member of the calmodulin family and binds 1-2 Ca²⁺ with K_Ca = 3 x 10^–5 M in vitro, suggesting it may act as a Ca²⁺ sensor for outer arm dynein. Here we investigate interactions between the LC4 light chain and HC. Two IQ consensus motifs for binding calmodulin-like proteins are located within the stem domain of the heavy chain. In vitro experiments indicate that LC4 undergoes a Ca²⁺-dependent interaction with the IQ motif domain while remaining tethered to the HC. LC4 also moves into close proximity of the intermediate chain IC1 in the presence of Ca²⁺. The sedimentation profile of the HC subunit changed subtly upon Ca²⁺ addition, suggesting that the entire complex had become more compact, and electron microscopy of the isolated subunit revealed a distinct alteration in conformation of the N-terminal stem in response to Ca²⁺ addition. We propose that Ca²⁺-dependent conformational change of LC4 has a direct effect on the stem domain of the HC, which eventually leads to alterations in mechanochemical interactions between microtubules and the motor domain(s) of the outer dynein arm.

	INTRODUCTION

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
Eukaryotic cilia and flagella are highly conserved organelles involved in cellular motility, fluid transport, and development. Motile cilia/flagella are powered by dynein motor proteins that form the inner and outer rows of arms attached to the outer doublet microtubules. These enzymes contain one or more heavy chain (HC) motor units associated with a variety of other components that serve to attach the motor at the appropriate location within the flagellum and to regulate activity so as to result in coordinated movement. Dynein HCs are members of the AAA⁺ family of ATPases and consist of an N-terminal stem region necessary for assembly, and a motor unit that contains six AAA⁺ domains and a C-terminal globular segment arranged in a heptameric ring (Samso et al., 1998; King, 2000; Samso and Koonce, 2004). The ATP-sensitive microtubule-binding site is located at the tip of a coiled-coil stalk protruding from between the AAA4 and AAA5 subdomains. In general, the region N-terminal of AAA1 is poorly conserved between the various axonemal and cytoplasmic dyneins and is involved in HC-HC interactions as well as association with various intermediate (ICs), light intermediate chains, and light chains (LCs) that may confer chain-specific regulatory and cargo attachment functions (for review see King, 2002).

To generate coordinated flagellar beating, dynein motor activity must be tightly controlled. Ca²⁺-regulated waveform alterations have been observed in the flagella of various cells including Paramecium (Naitoh and Kaneko, 1972), and sea urchin (Brokaw et al., 1974) and mammalian (Lindemann and Goltz, 1988) sperm. In demembranated and reactivated Chlamydomonas cell models, the cis- and trans- flagellar axonemes respond differentially to variations in Ca²⁺ concentration in the range pCa 8 to pCa 6¹ (Kamiya and Witman, 1984). Modulation of intraflagellar Ca²⁺ in the submicromolar range allows the cell to undergo phototaxis (directed movement toward or away from a light source), and mutant studies indicate that this control system requires the inner, but not outer, row of dynein arms (Kamiya and Okamoto, 1985; Mitchell and Rosenbaum, 1985). In addition, reactivated Chlamydomonas axonemes display an asymmetric beat pattern at Ca²⁺ concentrations below pCa 6, become quiescent at pCa 5, and then resume beating, but with a symmetric waveform at pCa 4 (Bessen et al., 1980). This waveform conversion provides the physiological basis for the photophobic (avoidance) response and either does not occur or is aberrant in strains lacking outer arms (Kamiya and Okamoto, 1985; Mitchell and Rosenbaum, 1985), suggesting that this motor is essential for flagellar reversal.

The Chlamydomonas outer arm contains three HCs (, , and ) that have distinct assembly and enzymatic properties (Pfister et al., 1982; Pfister and Witman, 1984; Sakakibara et al., 1991, 1993). These motor units are associated with two WD-repeat intermediate chains (IC1 and IC2), at least 10 light chains (LCs), and a trimeric docking complex (DC) necessary for attachment of the arm to the appropriate axonemal location (Takada and Kamiya, 1994). We demonstrated previously that ATP-sensitive microtubule binding by an outer arm dynein subparticle containing only the and HCs can be maximally activated above pCa 6 (Sakato and King, 2003). This observation suggested that outer arm dynein function is regulated by Ca²⁺ binding directly to a component of the motor complex in vitro.

The purified Chlamydomonas outer arm contains two potential candidates for this putative Ca²⁺ regulatory subunit. The docking complex protein DC3 has two consensus EF hands and binds one Ca²⁺ with K_d = 1 x 10^–5 M in a redox-sensitive manner; it also binds Mg²⁺ but with a much lower affinity (Casey et al., 2003a,b). However, a DC3-null mutant (oda14) rescued with a defective form of DC3 that cannot bind Ca²⁺ displays apparently normal photobehavior, suggesting that Ca²⁺-binding by this protein is not required for these responses (Casey et al., 2003a). The LC4 light chain, which directly associates with the HC, is also related to calmodulin and contains four helix-loop-helix motifs, two of which conform to the EF hand consensus for Ca²⁺-binding loops (Pfister et al., 1982; King and Patel-King, 1995). This LC binds 1-2 Ca²⁺ with K_Ca = 3 x 10^–5 M in vitro; it does not bind Mg²⁺ (King and Patel-King, 1995). The phenotypic consequences due to a lack of LC4 are unknown, because no mutants defective for this protein currently exist. However, the direct association of LC4 with a HC makes it a promising candidate for an outer arm Ca²⁺ sensor. Here we focus on the detailed interactions between LC4 and the HC and explore the molecular mechanism by which conformational alterations involving LC4 might regulate dynein motor activity in response to Ca²⁺ binding.

	MATERIALS AND METHODS

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
Strains and Culture Conditions
The Chlamydomonas reinhardtii strains used in this study are detailed in Table 1. These strains (except the oda11 oda4-s7 and oda11 sup1-2 double mutants constructed in this laboratory) are available from the Chlamydomonas Genetics Center (Duke University, Durham, NC). Cells were cultured in R medium (M medium plus 0.0075 M sodium acetate) with a light/dark cycle of 15 h/9 h and constant aeration (Witman, 1986).

Coimmunoprecipitation of Preassembled Dynein Subunits from Cytoplasm
Cytoplasmic extract preparation and coimmunoprecipitation were performed by following the method of Fowkes and Mitchell (1998) with minor modifications including autolysin treatment (Qin et al., 2004). Chlamydomonas cells were grown to a density of 1.0 x 10⁶ cells/ml in 500 ml liquid medium, harvested, treated with autolysin, and resuspended in immunoprecipitation (IP) buffer (30 mM HEPES, pH 7.4, 5 mM MgSO₄, 0.5 mM EDTA, 25 mM KCl, 1 mM dithiothreitol [DTT]) plus a 1/100x volume of protease inhibitor cocktail (P8849, Sigma, St. Louis, MO) to a total volume of 0.5 ml. The cell suspension was homogenized with an equal volume of acid-washed glass beads (diameter 1 mm) by vortexing for 1 min. The homogenate was clarified in a TLA100.2 rotor (Beckman, Fullerton, CA) at 33,000 rpm for 2 h at 4°C. The clarified cytoplasmic extract was supplemented with 75 mM NaCl and 0.05% Triton X-100 and incubated with CT240 antibody (generated in this study) or preimmune serum for 1 h at 4°C and for 1 more hour after the addition of 10 µl settled volume of ImmunoPure Immobilized protein G Plus beads (Pierce Biotechnology, Rockford, IL). The beads were washed three times with IP buffer containing 75 mM NaCl and 0.05% Triton X-100 and once with IP buffer only. The immunoprecipitates were eluted by adding 2x gel loading buffer (0.1 M Tris-Cl, pH 6.8, 0.2 M DTT, 4% SDS, 0.2% bromophenol blue, and 20% glycerol) and boiling. Twenty micrograms of cytoplasmic extracts and equal volumes of immunoprecipitates were analyzed by electrophoresis and immunoblotting.

Ca²⁺ Effects on HC Subparticle Sedimentation
The purified HC subparticle was fractionated in a 5–20% sucrose gradient in HME buffer (30 mM HEPES, pH 7.4, 5 mM MgSO₄, 1 mM EGTA) containing 1 mM DTT and 1 mM phenylmethylsulfonyl fluoride either in the absence of Ca²⁺, or at pCa 5 or pCa 3, in a SW55 rotor (Beckman) at 30,000 rpm for 12 h at 4°C. Appropriate amounts of a CaCl₂ stock solution were added to yield the desired Ca²⁺ concentration. Fifteen fractions of 350 µl were collected from each gradient. Recombinant LC4 protein (see below) was sedimented in parallel with the HC subparticle to confirm that this LC does not migrate at 12S in the absence of the HC. As additional controls, bovine brain tubulin (Cytoskeleton, Denver, CO), and the outer arm subunits were also sedimented in additional gradients. Equal volumes of each fraction were electrophoresed in 10% tricine SDS gels, 8% SDS gels, and 4% acrylamide 4 M urea gels and transferred to nitrocellulose for immunoblotting. Densitometric analysis was performed using ImageJ.

Preparation of Recombinant Proteins and Antibodies
Using the full-length HC cDNA² (constructed by Dr. C. G. Wilkerson, Michigan State University.) as template, the following fragments of the HC stem domain were amplified with Pfu DNA polymerase (Stratagene, La Jolla, CA) and cloned into the pMAL-c2 vector (New England Biolabs, Ipswich, MA); residues 1-442, 1-754, 1-1089, 1-1486, 1432-1848, 338-754, 691-1089, 691-1486, 875-893, 875-1167, 875-1182, 890-1167, 890-1182, 1014-1486, and 1164-1182. This resulted in fusion of these regions to the C-terminus of maltose-binding protein (MBP) via a hydrophilic linker containing a Factor Xa cleavage site. Fragments 338-754, 691-1089, 1014-1486, and 691-1486 were either expressed very poorly or showed very limited solubility and could not be used further. The control MBP-LacZ protein derived from the original pMAL-c2 vector; the MBP-LC4 construct was described previously (King and Patel-King, 1995). To generate an N-terminal 10x His-tagged LC4 construct, full-length LC4 was amplified with Pfu DNA polymerase using the original LC4 cDNA (King and Patel-King, 1995) as template and cloned into the pET16b vector (Novagen, Madison, WI).

Recombinant proteins were overexpressed in Escherichia coli strains XL1-Blue (Stratagene) or BL21(DE3)pLysS (Novagen). MBP fusion proteins were purified by amylose affinity chromatography (New England Biolabs). His-tagged LC4 was purified using His-Bind Resin (Novagen). Recombinant LC4 was obtained by digesting MBP-LC4 with Factor Xa and separating the products by anion exchange chromatography using a HiTrap ANX FF column (Amersham Biosciences, Piscataway, NJ) on a Biologic chromatography workstation (Bio-Rad Laboratories, Hercules, CA).

The MBP-LC4 and MBP- HC stem domain N1 (residues 1-442) proteins were used as the immunogens to obtain rabbit polyclonal antibodies CT61 and CT240, respectively. Sera were blot-purified against the appropriate recombinant proteins lacking the MBP moiety before use; for some preparations of CT61 His-tagged LC4 was used. Other antibodies used include rabbit polyclonals against LC1 (R5932; Benashski et al., 1999), LC3 (R4930; Patel-King et al., 1996; Harrison et al., 2002), LC5 (R4929; Patel-King et al., 1996), and DC1 (Wakabayashi et al., 2001) and murine monoclonals DM1A (Sigma), 1878A, 18A, 18C, and 12B versus -tubulin, IC1, and the , , and HCs, respectively (King et al., 1985, 1986; King and Witman, 1988a; Wilkerson et al., 1994). Immunoblotting was performed as described previously (Harrison et al., 1998).

In Vitro Expression of ³⁵S-labeled Proteins
To generate a LC4 construct for the binding assay, a PstI-XhoI fragment of the original LC4 cDNA was subcloned into pBluescript II KS+ (Stratagene) downstream of the T7 promoter and the SmaI and blunted BstBI sites were ligated to remove a part of the 5'-untranslated region (UTR) that contained additional out-of-frame ATG codons. For the chemical crosslinking experiment, a Kozak sequence was incorporated into the full-length and N-terminal–truncated versions of the LC4 construct to enhance translation initiation at the first AUG.

Radiolabeled LC4 proteins were synthesized using the TnT T7-coupled reticulocyte lysate system (Promega, Madison, WI). Each 50 µl reaction contained the amino acid mixture minus methionine and 20 µCi of EasyTag L-[³⁵S]methionine (PerkinElmer Life Sciences, Boston, MA). Reactions were incubated for 1.5 h at 30°C, chilled on ice, and clarified by centrifugation. Supernatants were pooled and subsequently used for binding assays or chemical crosslinking experiments. In addition to full-length LC4, the translation products from the 5'UTR LC4 construct included a series of N-terminal–truncated forms that derived from translation initiation at internal downstream Met residues.

In Vitro LC4- HC Binding Assay
MBP fusion proteins containing segments of the HC IQ motif region or LacZ were bound to a 100-µl settled volume of amylose beads in 100 µl of HMET (HME buffer plus 0.1% Tween 20) or HMECT (HMEC [HME buffer containing 1 mM Ca²⁺] and 0.1% Tween 20). The latter buffer was used to ensure that LC4 was fully saturated with Ca²⁺. Additional control samples containing no MBP fusion protein were processed in parallel. Beads were mixed with 2 µl of the 5'UTR LC4 in vitro translation reaction and incubated for 4 h at 4°C. Samples were washed five times with HMET or HMECT buffer, once with HME or HMEC buffer, and resuspended in 20 µl of 4x gel loading buffer. Samples were denatured for 30 min at 56°C, separated in 10–20% acrylamide tricine SDS gels, and stained with Coomassie blue. The ³⁵S-labeled proteins were detected by autoradiography using Fuji super RX film (Tokyo, Japan).

LC4- HC Chemical Crosslinking
Five micrograms of MBP protein fused to the HC stem fragments, the LacZ control, or no protein, in 40 µl of HME or HMEC buffer containing 1 mM DTT and 10 mM maltose were preincubated with 5 µl of the full-length or N-terminal–truncated form of ³⁵S-LC4 protein for 1 h on ice. Maltose was necessary for the solubility of the MBP- HC stem fragment fusion proteins. Crosslinking was initiated by the addition of 2 µl of 200 mM DMP in methanol (final concentration 10 mM), and samples were incubated for 1 h at room temperature; methanol without DMP was used as a control. After incubation, 20 µl of each sample was mixed with 5 µl of 5x gel loading buffer and denatured for 30 min at 56°C. Equal amounts of denatured samples were separated in 8% acrylamide SDS gels and stained with Coomassie blue, and ³⁵S-labeled protein was detected by autoradiography.

Crosslinking of native dynein samples with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC), 1,5-difluoro-2,4-dinitrobenzene (DFDNB), dimethylpimelimidate (DMP), and disuccinimidyl suberate (DSS) and vanadate-mediated photolysis of native dynein HCs was performed as described previously (Benashski and King, 2000). All chemical crosslinking reagents used in this study were obtained from Pierce Biotechnology.

Immunoprecipitation of Crosslinked Products and Mass Spectrometry
Crosslinking of purified outer arm dynein was performed by the addition of 10 mM DMP or solvent only in the presence of 1 mM Ca²⁺ as described above. The reaction was quenched by 0.1 M Tris-Cl, pH7.4, denatured in 2% SDS, and diluted with more than 20x volume of Tris-buffered saline (TBS; 50 mM Tris-Cl, pH 7.4, 150 mM NaCl) containing 1% Triton X-100 (to reduce the SDS level to below 0.1%). Twenty microliters of settled volume of CT61 antibody-bound protein G Plus beads was added to the diluted sample, incubated with gentle agitation overnight at 4°C, and washed five times with TBS. The immunoprecipitates were eluted by the addition of 40 µl of 2x gel loading buffer and boiling and analyzed by electrophoresis and immunoblotting. Twenty-five microliters of the eluate from the crosslinked sample was separately electrophoresed in an 8% acrylamide SDS gel and stained with Coomassie blue. The crosslinked product band was excised for mass spectrometry. This method is modified from King et al. (1991).

After trypsin digestion, peptides were identified by mass spectrometry at the University of Massachusetts Medical School Proteomic Mass Spectrometry Facility (Worcester, MA).

Negative Stain Electron Microscopy and Single Particle Analysis
For negative-stain electron microscopy, the HC subparticle was isolated by anion-exchange chromatography (Sakakibara and Nakayama, 1998) to avoid the use of sucrose, which adversely affects staining. Before electron microscopic observation, samples were examined by SDS-PAGE and staining with a fluorescent dye (SYPRO Ruby stain, Bio-Rad) to ensure that LC4 had not dissociated from the HC during purification. Purified HC subparticles were diluted to 20 nM with MMEK buffer (30 mM MOPS-K, 5 mM MgCl₂, 1 mM EGTA, 100 mM KCl, pH7.4) with or without 1.1 mM CaCl₂ (final concentration), fixed briefly with 2% glutaraldehyde, and applied to carbon-coated copper grids that had been treated with ozone to make the carbon film hydrophilic. Samples on grids were stained with 1.0% (wt/vol) uranyl acetate. Micrographs were taken with a JEM2000EX electron microscope (JEOL, Tokyo, Japan) operated at an accelerating voltage of 80 kV with a nominal magnification of 50,000x. Electron micrographs were digitized on an EPSON GTX-700 scanner (Seiko Epson, Nagano, Japan) at 1000 dpi, corresponding to a pixel size of 0.54 nm on the grid. Digital micrographs were imported into the SPIDER suite of programs (Frank et al., 1996) for all subsequent image processing (Burgess et al., 2003, 2004a,b). For the analysis, we used 703 particles imaged in plus Ca²⁺ conditions and 582 particles prepared in the absence of Ca²⁺. The particles were aligned using a reference-free alignment procedure and classified using K-means clustering (Burgess et al., 2004a). We often observed that there is a kink or inflection in the tail of the HC subparticle, and we set the kink point to the center of the alignment. Image classification was performed based on images of the N-terminal tail region.

Other Computational Methods
The HC IQ motifs were identified using the calmodulin target database (http://calcium.uhnres.utoronto.ca/; Yap et al., 2000).

	RESULTS

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
LC4 Associates with the HC
We raised rabbit polyclonal antiserum CT61 against an MBP/LC4 fusion protein and blot-purified the resulting serum using full-length recombinant LC4. Immunoblot analysis of wild-type flagellar axonemes (Figure 1A) and purified outer arm dynein (Figure 1B) revealed that this antibody detected a single major band corresponding to LC4. In axonemal, but not dynein, samples, at least four additional very minor bands were also observed. LC4 was missing in mutant axonemes (oda2 and oda3) lacking outer dynein arms, but was present in strains defective for other axonemal substructures (Figure 1A). In addition, LC4 was present in strains lacking the outer arm HC (oda11), the HC motor domain (oda4-s7), and an uncharacterized alteration in the HC that results in suppression of paralysis due to lack of the radial spokes or central pair microtubule complex (sup2 previously termed sup-pf2). Fractionation of outer arm dynein into two subparticles revealed that all LC4 is directly associated with the HC (Figure 1C) as suggested previously (Pfister et al., 1982), unlike the LC3 thioredoxin that binds to both the and HCs (Harrison et al., 2002).

View larger version (65K): [in this window] [in a new window]   Figure 1. Characterization of the CT61 antibody against LC4. (A) Axonemes prepared from wild-type and mutant strains (see Table 1) were electrophoresed in a 5–15% acrylamide gradient gel and stained with Coomassie blue (CBB, top). Similar samples were transferred to nitrocellulose and probed with blot-purified CT61 antibody (bottom). A single major band corresponding to LC4 was observed. This protein was missing only in mutants that lack the outer dynein arm (oda2 and oda3). Several minor bands were also detected in whole axonemal samples. Mr standards (x103) are indicated at left. (B) Left, electrophoretic analysis of purified intact outer arm dynein (including the docking complex) in a 5–15% acrylamide gradient gel; Coomassie blue stain. Right, an immunoblot of an identical sample probed with CT61. Only a single band that comigrates with native LC4 was detected. (C) Top, intact outer arm dynein and the and HC subunits electrophoresed in a 3–5% acrylamide 3–8 M urea gel to separate the individual HCs; silver stain. The band marked * is a proteolytic fragment previously referred to as "band 11" (Pfister et al., 1982) that is derived by cleavage at a site located 90 kDa from the C-terminus of the intact HC (King and Witman, 1988a). Similar samples were also electrophoresed in a 5–15% acrylamide gradient gel and probed with CT61 (bottom). The LC4 protein is present only in the intact dynein particle and the isolated HC subunit.

Cytoplasmic Preassembly of the LC4/ HC Complex

View larger version (36K): [in this window] [in a new window]   Figure 2. Cytoplasmic preassembly of the LC4/ HC complex. (A) Axonemes from wild type and the oda2 mutant strain, purified intact outer arm dynein, and the and HC subparticles were probed with the CT240 antibody raised against the HC N-terminal domain. This antibody specifically reacts with the HC and did not recognize other HCs within either oda2 axonemes or the HC subparticle from the outer dynein arm. (B) The CT240 antibody was used to immunoprecipitate the HC from a wild-type cytoplasmic extract. Immunoblot analysis (WB) revealed that the pellet contained the HC (detected using the 12B mAb) and LC4; neither protein was present in the preimmune control sample. (C) To further address the preassembly state of these components, cytoplasmic extracts (CE) prepared from wild-type, oda2, and oda3 cells were incubated with CT240 antibody, and the resulting immunoprecipitates (IP) were analyzed for the presence of the HC, LC4, IC1, LC5, and DC1 using antibodies 12B, CT61, 1878A, R4929, and anti-DC1, respectively. Note that LC4 was not detected in the original extracts at a loading of 20 µg, but could be observed when protein amount was increased and exposure times were lengthened (not shown).

LC4 Interacts with the N-terminal Domain of the HC

View larger version (33K): [in this window] [in a new window]   Figure 3. Association of LC4 with the HC N-terminal domain. (A) Map of the HC indicating the origin of the products generated by photocleavage at the V1 site and the location at which LC4 binds; this interaction may be stabilized by crosslinking. (B) The purified HC subunit was treated with 0–10 mM DMP in the presence of 1 mM ATP and 100 µM vanadate, electrophoresed in 4% acrylamide 4 M urea gels, and either stained with silver (SS) or blotted and probed with 12B and CT61 to reveal the HC and LC4, respectively (top). Similar samples were photocleaved at the V1 site within the HC before crosslinking (bottom). The N- and C-terminal HC photocleavage products are indicated at left. LC4 is crosslinked to the smaller, N-terminal fragment.

Stable Association of LC4 and the HC within the Native Complex

View larger version (29K): [in this window] [in a new window]   Figure 4. The native LC4/ HC complex is stable in both high and low Ca2+. The purified HC complex was sedimented in a 5–20% sucrose density gradient in the absence of Ca2+ (top) or at pCa 5 and pCa 3 (middle and bottom); the bottom of the gradient is at left. Equal volumes of each fraction were electrophoresed and the HC and LC4 detected by immunoblotting with 12B and CT61 antibodies, respectively. Recombinant LC4 was processed in parallel to ensure that it did not sediment at 12S in the absence of the HC. LC4 does not dissociate from the HC in a Ca2+-dependent manner. However, there is a small shift in the sedimentation coefficient of the complex toward a more rapidly migrating species at high Ca2+ levels. To further quantify this shift, the % of the total HC, recombinant LC4, the outer arm subunit, and tubulin dimer present in each fraction was determined in the absence of Ca2+ and at pCa 5 and 3; the latter two samples were sedimented in additional gradients (blots not shown). Unlike the subunit, neither LC4 nor tubulin shift upon Ca2+ addition; the subunit peak did not shift at pCa 5, but spread out by one additional fraction only at pCa 3. The arrowhead in the subunit plot indicates a small peak of dissociated IC/LC complex detected by the IC1 antibody (1878A).

Ca²⁺-dependent Alteration of the HC N-terminal Region

View larger version (95K): [in this window] [in a new window]   Figure 5. Electron microscopic analysis of the heavy chain subunit. (A) Survey micrograph of HC subunit particles prepared in the presence of Ca2+ and negatively stained with uranyl acetate. Scale bar, 40 nm. (B) Montage of class-averaged images of isolated HC subunit particles prepared for negative stain electron microscopy in either the presence or absence of Ca2+; both left and right views are shown. Scale bar, 15 nm. (C) Image averages of left and right views of the HC motor domain in the presence and absence of Ca2+ are shown. Scale bar, 15 nm. (D) Enlargement of the left view of one HC subunit particle class average imaged in the absence of Ca2+ and interpretative diagram illustrating the method used to measure the stem inflection angle . Scale bar, 15 nm. (E) The stem inflection angle was measured for particles prepared in the presence and absence of Ca2+. In the absence of ligand, a low angular dispersion (between 120 and 160°) about the inflection point was observed, whereas considerably greater variability in (between 35 and 140°) was found for particles prepared in the presence of Ca2+.

Ca²⁺-independent Attachment of Full-Length and Truncated LC4 to the HC N-terminal Domain

View larger version (33K): [in this window] [in a new window]   Figure 6. A Ca2+-independent LC4-binding region on the HC. (A) Map of the HC N-terminal region indicating the location and mass of the various segments used to assess LC4 binding; the interaction properties of each fragment in the presence and absence of Ca2+ are indicated (see also C). (B) Map of the LC4 constructs used and autoradiograph of the 35S-labeled in vitro–translated full-length and N-terminal–truncated proteins. (C) After incubation of LC4 with the HC stem domain fusion proteins, interactions were stabilized by DMP crosslinking, and the samples were electrophoresed. Only the HC N4 segment was competent to bind LC4 (both full-length and truncated forms) in a Ca2+-independent manner (arrows). No interaction was observed between LC4 and other parts of the HC N-terminal domain.

Ca²⁺-dependent Interaction of Truncated LC4 with the IQ Motif Region of the HC

View larger version (32K): [in this window] [in a new window]   Figure 7. Ca2+-dependent interaction of LC4(22-159) with the HC IQ region. (A) Map of the HC, indicating the location and sequence of the two IQ motifs. (B) Map indicating the various HC MBP fusion proteins used and whether they bound either full-length or the N-terminal–truncated form of LC4 in the presence or absence of Ca2+. Constructs containing the intervening (IV) region plus one or both IQ motifs bound LC4(22-159) well only in the absence of Ca2+ (++); the intervening region between the IQ motifs exhibited detectable binding (+). (C) Sequence of LC4 indicating the location of Met residues (bold) at which translation initiation occurred and the calculated mass and measured Mr of the products. The two EF hands are underlined. (D) MBP fusion proteins containing various segments of the IQ motif region and MBP-LacZ and bead-only controls were incubated with in vitro–translated LC4 (IVT) in the presence and absence of 1 mM Ca2+. Full-length LC4 did not bind to any of the constructs. In contrast, N-terminal truncated LC4 obtained by translation initiation at M22 bound to this HC region in a Ca2+-dependent manner.

LC3 Also Interacts with the N-terminal Domain of the HC

View larger version (38K): [in this window] [in a new window]   Figure 8. Chemical crosslinking defines intradynein interactions. (A) Diagram illustrating the crosslinked products generated by DMP treatment and subsequent V1 photocleavage of oda4-s7 dynein, which contains a truncated form of the HC (*). The relative size of the HC fragments corresponds to their apparent size after electrophoresis; it does not directly relate to their actual mass based on sequence. (B) Outer arm dynein containing a 160-kDa truncated form of the HC motor domain from oda4-s7 was incubated with 1 mM ATP plus 100 µM vanadate, and half the samples were irradiated with UV light to cleave the and HCs at their V1 sites. After the photolysis reaction, proteins were then subject to crosslinking with 10 mM DMP or were treated with solvent alone. Samples were electrophoresed and probed with 18A, 18C, and 12B to detect the N-terminal regions of the three HCs, and with R5932, R4930, CT61, and R4924, which recognize the HC-associated LC1, LC3, LC4, and LC5 proteins, respectively. The top series of blots indicate the location of HC bands and LC3, whereas the other LCs were analyzed with respect to LC3 in the bottom series. In the presence of DMP, LC3 is crosslinked to both the and HCs (labeled */3 and /3); after photolysis the HC/LC3 product (N-/3) lacks the C-terminal motor unit and consequently migrates more rapidly. Further analysis identified a crosslinked band containing the HC and LC1, LC3, and LC4 (/4/3/1). After photolysis, this complex yields two products: the HC N-terminal region crosslinked to LC3 and LC4 (N-/4/3) and a HC C-terminal domain linked to LC1 (C-/1). The arrowhead marks an additional product containing LC4 that is obtained in enhanced yield after UV irradiation to cleave the HCs at the V1 site; this product is further analyzed in Figure 9.

View larger version (64K): [in this window] [in a new window]   Figure 9. Ca2+-dependent crosslinking of LC4 to IC1. (A) Purified outer arm dynein was treated with the carbodiimide EDC or with the amine-selective reagents DFDNB, DMP, and DSS in the presence of 1 mM Ca2+. After electrophoresis in 8% acrylamide SDS gels, samples were probed for the presence of LC4. Crosslinked products containing LC4 and either the HC or p100 are evident in the EDC, DMP, and DSS samples; upon prolonged exposure a very small amount of product was detectable in the DFDNB-treated sample (not shown). (B) Purified outer arm dynein in the presence or absence of 1 mM ATP/100 µM vanadate, and 1 mM Ca2+ was treated with the indicated crosslinking reagents (20 mM EDC, 1 mM DFDNB, 10 mM DMP, and 0.01 mM DSS). Formation of the LC4- HC product was not dependent on either nucleotide or Ca2+. In contrast, LC4-p100 crosslinking was dramatically increased in the presence of Ca2+, and the product yield was also nucleotide-dependent. (C) Purified dynein was incubated at pCa 9–pCa 3 in the presence or absence of 10 mM DMP or 0.01 mM DSS. Significant levels of the LC4-p100 product were only obtained at and above pCa 4. (D) Immunoprecipitation of crosslinked LC4-p100 using the CT61 antibody. Purified outer arm dynein was crosslinked with 10 mM DMP in the presence of Ca2+ (Dynein), denatured, refolded, and immunoprecipitated (IP). Samples were electrophoresed in 10% tricine SDS gels and either stained with Coomassie blue (CBB) or transferred and probed with the CT61 antibody (WB). A LC4-p100 crosslinked product was immunoprecipitated in addition to LC4 as indicated at right. An inset at the bottom right shows an enlarged image of the boxed region of the Coomassie blue–stained gel. Mass spectrometry identified p100 as IC1. The asterisk indicates non-crosslinked IC1 that migrates with Mr78,000.

	DISCUSSION

TOP ABSTRACT INTRODUCTION MATERIALS AND METHODS RESULTS DISCUSSION REFERENCES

 
In Chlamydomonas, isolated flagellar axonemes exhibit waveform conversion from an asymmetric to a symmetric pattern in response to an increase in Ca²⁺ from pCa 6 to pCa 4 (Bessen et al., 1980). Mutational studies suggest that the outer row of axonemal dynein arms may be the ultimate target of this Ca²⁺-mediated signaling pathway (Kamiya and Okamoto, 1985; Mitchell and Rosenbaum, 1985). Previously we found that Ca²⁺ concentrations above pCa 6 maximally activate ATP-sensitive microtubule binding by purified - HC subparticles (Sakato and King, 2003). This indicates that outer arm dynein contains an integral Ca²⁺ sensor. Two Ca²⁺-binding proteins of the EF-hand superfamily have been identified within this structure: the docking complex protein DC3 (Casey et al., 2003a) and the HC–associated LC4 light chain (King and Patel-King, 1995). DC3 seems not to be involved in Ca²⁺ sensing because a null mutant (oda14) rescued with a DC3 variant unable to bind Ca²⁺ exhibits normal photo-induced behavioral responses, including waveform conversion (Casey et al., 2003a). Here we have examined the detailed interaction of the other candidate Ca²⁺ sensor (LC4) with the HC and describe structural alterations in this complex that occur in response to Ca²⁺ binding.

Interaction of LC4 with the HC
Four LCs (LCs 1, 3, 4, and 5) within the Chlamydomonas outer arm interact directly with their target HCs. LC3 and LC5 are thioredoxins and we have previously observed that at least one of these (LC3) interacts with two HCs ( and ; Harrison et al., 2002). The crosslinking experiments reported here further confirm this observation. In contrast, within the outer arm, the motor domain–associated protein LC1 interacts only with the HC (Benashski et al., 1999). Subfractionation of purified dynein and immunoblotting revealed that LC4 is similarly associated exclusively with the HC, as suggested previously from fractionation studies (Pfister et al., 1982). Furthermore, we observed that this LC4-HC interaction occurs within the cytoplasm, implying the preassembly of this HC/LC complex before its transport and incorporation into the flagellum.

Preassembled Outer Arm Dynein Complexes in the Cytoplasm
Previous studies of outer arm complexes within Chlamydomonas cytoplasm have revealed that all three HCs and both ICs can be immunoprecipitated by an anti- HC antibody (Fowkes and Mitchell, 1998) and that the dynein motor unit and docking complex are independently preassembled in the cytoplasm (Wakabayashi et al., 2001). Using an antibody directed against the HC N-terminal domain, we observed that LC4 was immunoprecipitated from wild-type extracts, indicating that HC-LC assembly also occurs in the cytoplasm. Intriguingly, in the same samples we obtained only very small amounts of IC1 and no DC1. However, the amount of immunoprecipitated IC1 increased very significantly in the DC1 mutant oda3, suggesting that the presence of the docking complex influences retention of IC1 and potentially the cytoplasmic assembly state of the outer arm dynein particle. Alternatively, because the N-terminal region of the HC must be located close to where these proteins interact, one possible reason for the low level of IC1 is that, in the presence of the docking complex, the CT240 antibody disrupts an interaction between the HC (or an associated protein) and components of the subunit; for example, we previously found that binding of an antibody against IC2 can disrupt association of the IC/LC complex with the and HCs (King and Witman, 1990).

Why Does the HC Contain Two IQ Motifs?
The IQ motif is an established binding consensus for calmodulin family proteins (Rhoads and Friedberg, 1997), although several distinct molecular mechanisms have been described for these interactions (Hoeflich and Ikura, 2002). The HC N-terminal domain contains two IQ motifs that promote interaction with LC4 and are thus functional. However, stoichiometry measurements based on both Coomassie blue dye binding and ³⁵S-labeling have indicated that there is a single copy of LC4 per dynein particle (King and Witman, 1989). The question therefore arises as to why there are two IQ motifs but only one bound copy of LC4. First, two copies of LC4 might interact with the HC in vivo, only one of which is bound sufficiently tightly to copurify with dynein after high salt extraction. Second, although both motifs can interact with LC4 in vitro, one might be used in vivo to bind a related protein, e.g., calmodulin, centrin, or the docking complex protein DC3. Although there is no direct evidence in support of this possibility, it cannot be ruled out at the present time. Finally, recent studies of calmodulin binding to the neck domain of myosin V (Martin and Bayley, 2004) and the small conductance Ca²⁺-activated K⁺ channel (Schumacher et al., 2001) have revealed that the N- and C-terminal domains of a single calmodulin molecule can independently bind to two different IQ motifs aligned in parallel, thereby forming a bridge between them; in the case of the K⁺ channel, this involves both Ca²⁺-dependent and -independent interactions and leads to Ca²⁺-dependent dimerization. If LC4 bound the HC N-terminal domain in a similar manner, it would readily explain the interaction with both IQ motifs as well as the apparently critical role played by the 278-residue intervening region. Furthermore, as only the two N-terminal helix-loop-helix motifs of LC4 conform to the consensus for Ca²⁺ binding (King and Patel-King, 1995), this model could accommodate a Ca²⁺-dependent interaction with one IQ domain and a Ca²⁺-independent association with the other. The differential interactions of these LC4 regions with the HC might alter the conformation of the complex and provide the physical basis for the shift in sedimentation coefficient, enhanced flexibility of the N-terminal region and interaction with IC1 observed upon Ca²⁺ addition. A model depicting these interactions is shown in Figure 10.

View larger version (18K): [in this window] [in a new window]   Figure 10. A model for LC4 interactions within outer arm dynein. In the absence of Ca2+, LC4 is tightly bound to the HC (left); this complex cannot efficiently form a rigor bond with MTs (Sakato and King, 2003). After Ca2+ addition, LC4 changes conformation and its Ca2+-bound EF hand motifs detach from the IQ region and come into proximity of or attach to IC1 (center). This is predicted to lead to an alteration in the N-terminal stem domain of the HC and the activation of motor activity. After ATP addition, a further change in HC conformation occurs, causing LC4 to move somewhat away from IC1 (right). Other outer arm dynein components including the HC are not incorporated into this diagram because their functional interactions with either the HC, LC1, or LC4 have not been defined.

The HC Is Regulated by Multiple Signaling Pathways
Previously, we found that motor activity of the HC is required for Ca²⁺-dependent activation of ATP-sensitive MT binding by the - HC subparticle (Sakato and King, 2003). Furthermore, we observed that crosslinking of - HC dynein from oda11 sup1-2 that contains a HC with a defective coiled coil stalk domain still generated the LC4-IC1 product. This indicates that LC4 can undergo a Ca²⁺-dependent conformational change in this mutant dynein, even though it does not result in the activation of ATP-dependent microtubule binding. This suggests that the configuration of these two HCs is important to exert full motor activity at high Ca²⁺ concentrations. Because LC4 comes into close proximity of IC1 at high Ca²⁺, Ca²⁺-dependent conformational change of LC4 likely has a direct effect on the HC stem rather than its motor domain. This would be consistent with our observation that the stem domain adopts a relatively constant orientation in the absence of Ca²⁺ but is much more variable in its presence. Furthermore, recent studies revealed that the stem domain of the dynein HC undergoes a dynamic structural change during the ATP hydrolytic cycle and that this motion contributes to formation of the power stroke (Burgess et al., 2003; Kon et al., 2005). In addition, we observed that the Ca²⁺ sensitivity of the - HC subparticle was altered by binding tubulin to the basal ATP-insensitive site (our unpublished observations), providing further evidence that dynein motor activity can be modulated through the stem domain.

Chlamydomonas flagellar motility is also controlled by redox poise (Wakabayashi and King, 2006). The LC3 thioredoxin interacts with the HC and ATPase activity of this motor unit, but not the and HCs or the inner arms, is activated by sulfhydryl modification (Harrison et al., 2002). These observations suggest that the redox control mechanism may involve or be mediated through the HC. Furthermore, the HC has two potential regulatory inputs directly to the motor domain. Two copies of the leucine-rich repeat protein LC1 are associated with the nucleotide binding sites of the HC motor domain and also interact with an additional axonemal component (Benashski et al., 1999; Wu et al., 2000; DiBella et al., 2005) We have proposed previously that Arg residues within the terminal helix of LC1 control ATPase activity in a manner similar to the "arginine fingers" that promote GTPase activity of Ras and Rho (Wu et al., 2000; King, 2002); recent work has shown that the RNA interference–mediated knock down of an LC1 orthologue in trypanosomes leads to defective motility (Baron et al., 2007). Furthermore, analysis of the Chlamydomonas phosphoproteome (Wagner et al., 2006) has revealed that the HC is phosphorylated on Ser2467, which is located within the third AAA⁺ domain. Mutational studies of cytoplasmic dynein indicate that this domain plays an important role in dynein motor function (Silvanovich et al., 2003), and single molecule analysis (Mallik et al., 2004) suggests that nucleotide binding at domains other than AAA1 regulates the power stroke mechanism.

In conclusion, we have defined specific structural alterations within the outer dynein arm that involve the HC, LC4, and IC1 and occur in response to an increase in Ca²⁺. These results provide further evidence for the regulation of outer dynein arm structure and activity by Ca²⁺ and impart ins